SM2148

3,300mm Tissue Machine, inclined wire, 9.5bar Yankee, 17-32gsm, 65-95 tpd

Paper Machine Details

  • Make: Beloit - Year of manufacture 1972.
  • Type: Inclined wire - Suction breast roll.
  • Head box: Nozzle type, hydraulic.
  • Head box slice width: 3,454.4 mm
  • Wire width x length: 3,556 mm x 1,6160 mm
  • Sheet width at reel: 3,302 mm
  • Basis weight at wire: 11.6 - 24 gsm
  • Basis weight at reel17 - 32 gsm
  • Maximum operating speed: 1,220 M/min
  • Production: 65-95 tpd
  • Yankee Cylinder:4,586 mm diam x 3,690 mm length
  • Yankee wall thickness: 59 mm (Year of manufacture 1993 - Voith)
  • Maximum steam pressure: 9.5 bar
  • Gas fired hood temperature: Max. 420 degree C

Stock and Approach Flow

  1. Pulpers:                                                       1 No.
  2. Refiners DDR from Sprout Waldron:             2 Nos.
  3.  Pressure screens:                                       Primary and secondary.
  4. Approach flow:                                            Multiple distributor.

Rewinder (Combiner Station)

  1. Maximum speed:                                         1,450 MPM
  2. Maximum dia of rewound reels:                   1,500 mm
  3. Maximum no. of slitting knives:                    17 Nos.
  4. Minimum slit width:                                      200 mm
  5. Maximum finished deckle:                            3,250 mm
  6. Core size:                                                    162 ID X 206 OD
  7. Number of plys:                                           1 to 4
  8. Calendar Stack:                                           3 Nos.


Note:

The tissue machine was installed and put in working condition to manufacture all types of tissue papers. Originally it was running in Germany till the end of 1995. This machine was relocated and has run satisfactorily off and on from February 1999 to December 2000. Machine was stopped due to lack of market demand
The machine was equipped with new Voith Yankee Cylinder just 2 years before sale in Germany.
Machine is complete with Accuray QCS microprocessor with basis weight and moisture controller.
Machine is controlled by DCS system from Stock Preparation to Pope Reel.

PM-8 EQUIPMENT

Following equipment is available "as & where is basis".

  1. 1) Chest Agitators/Pumps
  2. 2) Heat Recovery spray tower
  3. 3) Head box
  4. 4) Wire Part
  5. 5) Suction Press roll-1 No.
  6. 6) Voith make Yankee with drive
  7. 7) Doctor Holder-1 No.
  8. 8) Pope reel
  9. 9) Tambour Rolls-10 Nos.
  10. 10) Gas Hood
  11. 11) Combiner
  12. 12) Doctor blade grinding machine
  13. 13) Voith make Pressure screen-2 Nos.
  14. 14) Fan Pump
  15. 15) Pulper-1 No.
  16. 16) Broke Pulper
  17. 17) Drive & drive panels
  18. 18) DCH system
  19. 19) Compressor

Following equipments are excluded and not available.

  • 1) Pulper-1 No.
  • 2) Centricleaner
  • 3) Refiners
  • 4) Chemical preparation system
  • 5) Suction press roll-1 No.
  • 6) Vacuum pumps
  • 7) Pipe Iines (most)